|
Post by Admin_Vistamike on Feb 24, 2016 11:00:03 GMT
|
|
|
Post by Lighthouse on Feb 24, 2016 11:46:12 GMT
I think 30psi is too low for an air duster. You should be looking for min 60psi, better would be 90ish
|
|
|
Post by Admin_Vistamike on Feb 24, 2016 11:58:50 GMT
|
|
|
Post by Lighthouse on Feb 24, 2016 12:32:30 GMT
|
|
|
Post by Admin_Vistamike on Feb 24, 2016 13:26:17 GMT
Now that is interesting, I'll have a look on UK sites
EDIT:
Nearly everything I found ships from US but what is available here costs around 65 quid plus. Poor reviews to boot. So given the quest the Order of the Welly!!
So have ordered the airbrush anyway as I need it, if 30psi (just over bar) works then it is a bonus.
Air duster cans cost a bloody fortune here and recently have had some that express too much water.
|
|
|
Post by Admin_Vistamike on Feb 26, 2016 13:40:30 GMT
Update,
The kit arrived last night and I am pleased with it, did a few tests not bad results for a grasshopper!! I tried it as an air duster on some fans and it worked ok,so it will double up as a tool. I used some spare beer line tubing reducing and found that to work fine. Reaches 4 bar (about 55psi) in 10 secs.
Now to experiment with different paints, learning thinning etc and things to airbrush!!
|
|